Description

Assembled in USA. Unit equipped with Kulthon WJ9490Z-2 Compressor.

28-1/2”L X 16-1/4”W X 16-3/4”H

Electrical : 208-230 Volt 60 Hz 1 Phase

Nominal Performance

Cooling Capacity 2,696 / 4,490Watts

9,199 / 15,320 BTU/Hr

2,318 / 3,861 Kcal/Hr

Power Input 1,635 / 2,100 Watts

Lock Rotor Amps 45.00 / 45.00 Amps

Max Continuous Current – / – Amps

Rated Load Amps 7.10 / 9.20 Amps

COP 1.65 / 2.14 Watts / Watts

Testing Conditions

Condensing Temperature 54.40 °C 129.9 °F

Evaporating Temperature -6.70 / – °C 19.9 / °F

Liquid Temperature 46.00 °C 114.8 °F

Return Gas Temperature 35.00 °C 95.0 °F

Ambient Temperature 35.00 °C 95.0 °F

Application

Evaporating Range MBP/HBP A/C : -23.30 °C to 12.70 °C

(-9.9 °F to 54.9 °F)

Heat Pump : – °C to – °C

Refrigerant R404A

Refrigerant Flow Control Capillary tube/Expansion valve

Compressor Cooling Fan

Compressor and Motor data

Compressor Type Reciprocating

Displacement 26.70 cc.

Oil Type Polyolester Oil

Oil Charge 850 cc.

Motor Type C.S.R. ; 2 Pole 3,500 / 3,500 r/m

Voltage Range 203-264/- Volts 60/- Hz.

Winding Resistance at 25 ° C

Start 4.30 Ohms

Run 1.96 Ohms

Electrical Components

Motor Protector

Type Internal Overload

Model Number KGE 656-10

Open / Close 130-140 / 60-78 ° C

1st Cycle trip at 25 ° C 52.00 Amps(main) 31.00 Amps(start)

Motor Starter

Type Potential Relay

Model Number KGE 681-9 (RVA4AM6D)

Pick Up (max.) 242.00-272.00 Volts

Drop Out (min.) 60.00-121.00 Volts

Terminal Cover KGM 901-1

Start Capacitor 108-130 µF 330 VAC.

Disch Resistor for Start Cap 15000 Ohms 2 W

Run Capacitor 35 µF 425 VAC.

Mounting Kit

Rubber Grommet KGM 905-2

Sleeve Grommet KGM 903-2